Y42-2F
Most common carburetor numbers on this marine carburetor, but not limited to:
80382,
80382-1
80382-2, 80382-3
385712, 987013
Red circle shows location
of carburetor number
Click picture for close up view
* Carburetor Number:
NOTE: If your carburetor number is not shown above and carburetor is one of these numbers: 80386, 80386-1, 50461, R50461, 987418, or E8JL-4510-AA Click Here
The throttle plate numbers for this Y42-2F are 215. If your marine carburetor is still on your boat and the carburetor number is listed above for the Y42-2F, you can select "Carb Still on Boat". If not one of these carb numbers, please get numbers off throttle plates.
* Throttle Plate Number:
Select Throttle Plate Number
107
215
237
Not Sure - Carb Still on Boat
The Y42-2F marine carburetor you have chosen usually has a fuel pump overflow tube . The yellow circle shows the location of the fuel pump overflow tube. If overflow tube is capped off you may select "Does NOT Have Overflow Tube".
* Fuel Pump Overflow Tube:
Select Fuel Pump Overflow Tube
Has Fuel Pump Overflow Tube
Does NOT Have Overflow Tube
The Y42-2F marine carburetor you have chosen does not have a PCV vacuum line tube . The yellow circle shows the location of the 3/8 inch vacuum line tube on base that goes to the PCV valve. If vacuum line is on a spacer plate below the carburetor, answer will be "No PCV Vacuum Line". If your marine carburetor has PCV vacuum line capped, answer will be also be "No PCV Vacuum Line".
* 3/8 PCV Vacuum Line on Base:
Select PCV Vacuum Line
Yes, Has PCV Vacuum Line
No PCV Vacuum Line
* Boat Year:
* Boat Make/Model:
* Engine Size:
* Type of Sterndrive :
Select Type of Sterndrive
Mercruiser
OMC
Volvo Penta
Inboard
Other (List in Comments)
Additional Comments:
If your carburetor has missing parts, broken parts, core damage, or is different from the one being ordered, please list damage or differences in the Additional Comments box above.
* Core Return:
Will you return a Core?
Yes, I will return a Core
No, I will not return a Core
* Where did you find us?:
Please Select One from List
Yahoo
Google
America Online
Bing
Business Referral
Flyer or Mailer
Magazine Advertisement
Previous Customer
Other
Serving our valued customers for over 40 years. We use only new parts and the carburetor is coated with a long lasting Aluminum Oxide finish and then coated with black lacquer paint for extra protection. Delivering you a completely tested, calibrated, and idle adjusted carburetor. Our marine carburetors are ready for easy installation and come with a complete one year warranty .
* Base Gasket:
Do you want a Base Gasket?
Yes, Include Base Gasket (Additional $9)
No, Do not need a Base Gasket
I Accept Core Return Policy